Elimination of the welding between beam and connector: now a single piece.  Widening of the vertical section of the point of junction between beam and upright, thanks to flattening at that point, in order to increase the angle the thrust line and load-bearing axis. Narrowing of the orizontal section at the point of the junction with the upright. This allows to reduce the tendency of the beams to rotate to one side due to the concentration of the pressure on their internal side, brought to bear by the weight of the pallets.

Greater static resistance, thanks to increased sturdiness. Greater dynamic resistance to shocks durng the handling phase. No sharp corners. Purple coloring, easily visible and differentiated from the other conventional signaling colors in  use (red=hot water or overheated steam, yellow= gas, etc.). The uprights feature an exclusive ground-anchor system, with stops on the feet, for guaranteeing stronger anchorage for increased safety in seismic conditions. Z200 zinc-plated upright for grater protection with respect to market standard (normally Z100). The excellent zinc transfer effect thus obteined provides increased protection even on the contact edges of the parts.

	Elimination of the welding thanks to the innovative press work production process. Reduction of the height of the beams with unaltered load capacity anf performance features. Better exploitation of space during transport. The side frames can be broken down for shipping and the cross pieces and the braces assenbled at destination. Thi permits increased economy of space and therefore of shipping costs with the respect od traditional system, which requires shipping the end frames with the cross pieces and the braces already assembled. Grater overall system adaptibility thanks to fact that beam connection requires only 50 mm.